Home Products Products Luminaires Outdoor luminaires LED wall luminaires LED Bulkhead Switch 2CCT with motion sensor

LED Bulkhead Switch Sensor 7W-10W-16W 570-1500lm 830-840

Article number: 146831

BAI LED Bulkhead Switch Microwave Motion Sensor Oval 2CCT 7W-10W-16W 570-855-1500lm 3000K-4000K IP54 IK07 Grey plastic housing 225x100x65mm Bulleye / Bullseye

This typical motin sensor wall fixture or basement fixture is also called Bulleye, Bully, Bulkhead or Hublot. The light gray housing and the opal white diffuser are made of sturdy UV-resistant plastic (IK07). The special thing about this Bulkhead is that it has 5 dip switches with which you can set the range, hold time and daylight sensor. In addition, 2 switch functions with which the wattage consumption (7W, 10W or 16W which determines the light intensity) and the light color (3000K warm white and 4000K cold white) can be set in advance. This is very practical if you want to be able to make the best choice on site. There are no fewer than 6 cable entries, so that feeding through and looping is no problem. IP rate IP54. This energy-efficient light is supplied without a cable and is easy to assemble. Typical areas of application are basements, portals, fire lanes, sheds, workshops and garages. Ambient temperature: -20°C to +40°C.

Data not available (yet). Please contact our sales department for more information.

Request a quote for this article

Click here for Eprel specifications

General ETIM properties

ETIM group
Luminaires
ETIM class
Ceiling-/wall luminaire
Name
LED Bulkhead Switch Sensor 7W-10W-16W 570-1500lm 830-840
Brand
Bailey
Productseries
LED Bulkhead
Producttype
Switch sensor
GTIN
8714681468319
Manufacturer articlenumber
146831

ETIM specifications

Colour temperature [K]
3000 - 4000
Housing colour
Grey
Degree of protection (IP)
IP54
With movement sensor
Yes
With light sensor
No
Width [mm]
100
Length [mm]
225
Nominal voltage [V]
220 - 240
Suitable for wall mounting
Yes
Impact strength
IK07
Dimmable
No
Suitable for suspended mounting
No
Suitable for ceiling mounting
Yes
Suitable for built-in mounting
No
Suitable for surface mounting
Yes
Suitable for light line configuration
No
Suitable for workplace according to EN 12464-1
No
Lamp type
LED exchangeable
With light source
Yes
Suitable for emergency lighting
No
Suitable for number of light sources
1
Housing material
Plastic
Surface protection housing
Other
Material cover
Plastic, transparent
Type of grid
None
Voltage type
AC
Nominal current [mA]
83 - 83
Type of control gear
LED operating device current-controlled
With control gear
Yes
Exchangeable control gear
No
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI-2
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming potentiometer (integrated)
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming manufacturer's proprietary system
No
Dimming mains voltage modulation
No
Dimming phase cut-off (trailing edge)
No
Dimming phase cut-on (leading edge)
No
Dimming programmable
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming with push-button
No
Dimming depending on control gear
No
No dim function
Yes
Light distributor
None
Light distribution
Symmetric
Beam angle
> 80° - Extreme wide beam
Colour consistency (McAdam ellipse)
SDCM6
Light outlet
Direct
Energy efficiency class of the built-in lamp
Other
Rated lifetime L70/B50 at 25 °C [h]
35000
Protection class according to IEC 61140
II
Rated ambient temperature according to IEC 62722-2-1 [°C]
-20 - 40
Emergency power supply integrated
No
Covering of the luminaire with thermally insulating material possible
No
With air slots
No
Filament test according to IEC 60695-2-11
650 °C - 30 s
Suitable for lamp power [W]
6 - 15
Max. system power [W]
16
Rated luminous flux according to IEC 62722-2-1 [lm]
1500
Colour of light
White
Flickering value Pst LM
1
Colour rendering index CRI
80-89
Power factor
0.7
Stroboscope effect value SVM
0.4
Constant light output (CLO)
No
Height/depth [mm]
65
Type of wiring
Suitable for loop-through wiring
Number of poles
3
Conductor cross section [mm²]
2.5
Connection type
Push-in clamp
Luminous intensity [cd]
380
Colour of light adjustable
Positions
Luminous flux adjustable
Positions
Beam angle adjustable
No
Operation by Bluetooth
No
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
IFTTT support available
No
Suitable for wall mounting
Yes
Energy efficiency class of the light source according to EU regulation 2019/2015
E
Compatible with Casambi
No
Meets min. EIA lifetime criterion L90 (at 50,000 hours at tq = 25 °C)
No
Suitable for clamp-mounting
No
With mounting material
Yes
Containing product according to 2019/2020/EU
No
Degree of protection (IP), rear side
Other
Degree of protection (IP), front side
IP53
Emergency power supply system
None
Emergency function monitoring system
None
With switch
No
With presence detector
No
Movement sensor/presence detector technology
High frequency
Luminaire efficacy [lm/W]
81 - 94
Rated luminous flux according to IEC 62722-2- 1 [lm]
570 - 1500
Luminous intensity [cd]
380 - 380
Ball-proof according to DIN 18032-3
No
Downloads
Manual
IM_LedBulkheadSwitchSensor146831-A501.pdf
SalesBrochure
Brochure_Bulkheads.pdf