Home Products Products Luminaires Outdoor luminaires LED wall luminaires DEFA Neptune LED Cross

122841 Neptune 2.0 Cross Detect LED 8W 3000K Black

Article number: 144306

DEFA Neptune 2.0 Round Cross Radar Detect LED 8W 3000K 584lm LightAdjust 8 steps 230V/AC IP65 IK10 Black Alu body Opal diffuser Vandal resistant

The DEFA Neptune is a vandal-proof quality outdoor LED fixture. It is made in high-pressure die-cast aluminum. The diffuser is made from UV- and vandal-resistant polycarbonate. The front ring is fixed with four Torx screws in stainless steel which are given a Delta seal treatment. IP65, IK10, class I, Lifetime L80B50 62.000h. Applications: Parking facilities, exteriors, entrances, stairs, pedestrian areas, underpasses and tunnels. The sensitivity of the microwave motion sensor can be adjusted via DIP-switch. The hold time (duration of time the light is on after the last detection) can also be adjusted between 5 sec and 25 min. Radar versions can be used as Masters for other fittings. Master-Master or Master-Slave-Master configurations can also be used. LightAdjust makes it possible to set one of the 8 preferred light levels (lumen). By default the fixture is set on the highest lumen level.

Data not available (yet). Please contact our sales department for more information.

Request a quote for this article

General ETIM properties

ETIM group
Luminaires
ETIM class
Ceiling-/wall luminaire
Name
122841 Neptune 2.0 Cross Detect LED 8W 3000K Black
Brand
DEFA
Productseries
Neptune LED 2.0
Producttype
Cross 001 Detect
GTIN
7323201228411
Manufacturer articlenumber
122841

ETIM specifications

Lamp holder
Other
Colour temperature [K]
3000 - 3000
Housing colour
Black
Degree of protection (IP)
IP65
With movement sensor
Yes
With light sensor
No
Nominal voltage [V]
220 - 240
Suitable for wall mounting
Yes
Impact strength
IK10
Dimmable
No
Suitable for suspended mounting
No
Suitable for ceiling mounting
Yes
Suitable for built-in mounting
No
Suitable for surface mounting
Yes
Suitable for light line configuration
No
Suitable for workplace according to EN 12464-1
No
Lamp type
LED not exchangeable
With light source
Yes
Suitable for emergency lighting
No
Suitable for number of light sources
1
Housing material
Aluminium
Surface protection housing
Powder coating
Material cover
Plastic, opal
Type of grid
Matt
Voltage type
AC
Type of control gear
LED operating device current-controlled
With control gear
Yes
Exchangeable control gear
No
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI-2
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming potentiometer (integrated)
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming manufacturer's proprietary system
No
Dimming mains voltage modulation
No
Dimming phase cut-off (trailing edge)
No
Dimming phase cut-on (leading edge)
No
Dimming programmable
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming with push-button
No
Dimming depending on control gear
No
No dim function
Yes
Light distributor
Diffuser lens/optic/panel
Light distribution
Symmetric
Beam angle
> 80° - Extreme wide beam
Colour consistency (McAdam ellipse)
SDCM4
Light outlet
Direct
Energy efficiency class of the built-in lamp
A++, A+, A (LED)
Energy efficiency class of the provided exchangeable built-in lamp
D
Rated lifetime L70/B50 at 25 °C [h]
62000
Rated life time L80/B10 at 25 °C [h]
62000
Degree of protection (NEMA)
4X
Protection class according to IEC 61140
I
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24
No
Rated ambient temperature according to IEC 62722-2-1 [°C]
-10 - 25
Emergency power supply integrated
No
Covering of the luminaire with thermally insulating material possible
No
With air slots
No
Filament test according to IEC 60695-2-11
850 °C - 30 s
Suitable for lamp power [W]
3 - 8
Max. system power [W]
8
Luminaire efficacy [lm/W]
80
Rated luminous flux according to IEC 62722-2-1 [lm]
584
Colour of light
White
Flickering value Pst LM
1
Colour rendering index CRI
70-79
Power factor
0.9
Stroboscope effect value SVM
0.4
Constant light output (CLO)
No
Height/depth [mm]
87
Outer diameter [mm]
240
Type of wiring
Suitable for loop-through wiring
Number of poles
4
Conductor cross section [mm²]
2.5
Connection type
Push-in clamp
Photobiological safety according to EN 62471
RG1
Colour of light adjustable
No
Luminous flux adjustable
Positions
Beam angle adjustable
No
Operation by Bluetooth
No
Compatible with Apple HomeKit
No
Compatible with Google Assistant
No
Compatible with Amazon Alexa
No
IFTTT support available
No
Suitable for wall mounting
Yes
Energy efficiency class of the light source according to EU regulation 2019/2015
D
Compatible with Casambi
No
Meets min. EIA lifetime criterion L90 (at 50,000 hours at tq = 25 °C)
No
Suitable for clamp-mounting
No
With mounting material
Yes
Containing product according to 2019/2020/EU
No
Degree of protection (IP), rear side
Other
Degree of protection (IP), front side
IP65
Emergency power supply system
None
Emergency function monitoring system
None
With switch
No
With presence detector
No
Movement sensor/presence detector technology
High frequency
Luminaire efficacy [lm/W]
56 - 80
Rated luminous flux according to IEC 62722-2- 1 [lm]
167 - 584
Ball-proof according to DIN 18032-3
No
Downloads
Datasheet
Datasheet_Neptune_2.0_LED_Cross.pdf
Manual
Mounting_instructions_Protect_Neptune_2.0.pdf
Installation instructions
LightAdjust_instruction_Protect_Neptune_2.0.pdf
Installation instructions
Radar_sensor_instruction_Protect_Neptune_2.0.pdf
LDT-files
LDT_144306_122841_Neptune2.0RadarCross.ldt

Alternative articles
122850 Neptune 2.0 Cross Detect LED 8W 4000K Black

143883

Complementary articles
122108 Diffuser 2.0 Protect and Neptune Round Opal PC

144561

Snake Eye Set M4 Bit And 4X M4 Screw

DEFA99937353

Screw M4x20 A2 Snake Eye

DEFA105255